|
|
 |
High Torque Motors
 (Select Quantity Below)
|
Practical for industrial and laboratory applications
Here's our most versatile DC gear motors. Each version is a light, quiet motor and fully enclosed in ABS plastic. Choose these motors when you need a strong quiet DC gear motor that draws low current so your amperage requirements can be met.
Operating voltage ranges from 3V or 12V DC. This is a DC gearmotor perfect for a variety of uses such as control motors or even pump motors. Choose an all metal geartrain or plastic gears depending on your set torque requirements or on your needed noise requirements.
Self-starting motors feature:
- Slow speed and high torque
- DC reversible gear trains
- Motor housing 1-13/16" L x 1-13/16" O.D.
- Steel shaft
- Diameter x 11/16" L.
- Weighs approx. 2 3/4 oz.
- No-load drain Approximately 8mA at 12V
- Continuous run, low temp
 Gift Wrap Available
|
Customer Reviews
Overall Rating:   and share your thoughts with other customers Sort Reviews: Newest | Oldest | Highest Rating | Lowest Rating  - Thursday, August 06, 2009 not as is it specified Reviewed By: Rainer (New York, New York) If you are looking for a really accurate motor, this is not the one. I bought two 1-rpm motors with the same disappointing result. Afterwards, I realized that as any DC motor, the speed is proportional to the DC voltage. In order to obtain a really accurate speed, I needed to build a voltage regulator (LM317) with variable resistances so I could trim precisely the DC voltage (something that could in the future be included with the motor), since nominal voltages in AC-DC transformers are also not very accurate. Once achieved, the speed is pretty stable.
On the other hand, as quiet as it is advertised?….not the case, even with plastic gearing. I bought this motor in order to replace a 15 year old 1-rpm AC motor (used year around in a clock). Truth is that that old beggar is more accurate and silent than the one advertised in this page.
I'm giving it a mark 2, for the effort  - Monday, July 21, 2008 High Torque Motors Reviewed By: James (Palmdale, CA) Have ordered and used this item and other RPM models and all work well. They stay very cool to touch, and are very accurate for the RPM listed. Would recommend this to others. - Friday, June 05, 2009 Gottlieb Blackhole Reviewed By: Pete (Esko, MN) This motor worked perfectly in my Gottlieb blackhole. No cutting or fabing needed. Read More Reviews |
|
|
